I-ASTM A179 U Gobela iTube yoTshintshiselwano lobushushu

I-ASTM A179 U-Bend Ubushushu boTshintshiselwano lweThubhu eFakelweyo Umfanekiso
  • I-ASTM A179 U Gobela iTube yoTshintshiselwano lobushushu

Inkcazelo emfutshane:

Emva kokugoba kwe-U (ukwenza okubandayo), unyango olushushu lwenxalenye yokugoba lunokufuneka.umatshini ovelisa i-nitrogen (ukukhusela umphezulu wetyhubhu yentsimbi engenakutyiwa ngexesha lokufakwa kwe-annealing).Iqondo lobushushu lilawulwa kuyo yonke indawo ephathwa ubushushu ngeepyrometers ezisisigxina kunye neziphathekayo ze-infrared.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukugoba ityhubhu esemgangathweni kunye neMathiriyeli

● I-ASTM A179/ ASME SA179;

● I-ASTM A213/ ASME SA 213, T11, T22, T22, T5;

● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410;

● I-ASTM B111, C44300, C68700, C70600, C71500;

● I-ASTM B338, GR.1, GR.2.

● I-Monel Alloys.

● I-Nickel Alloys.

● U Bend Dimension isakhono.

● Ibhobho OD.: 12.7mm-38.1mm.

● Ukutyeba kweTubhu: 1.25mm-6mm.

● Ukugoba iRadius: Min.1.5 x OD/ Max.1250mm.

● I-tube ye-U ethe ngqo "umlenze" Ubude: Ubukhulu.12500mm.

● Umbhobho othe ngqo phambi kokuba u-U ugobe: Ubukhulu.27000mm.

Izicelo zeMveliso

I-U Bend Tubes ye-Heat Exchangers esetyenziswa kakhulu kwizityalo zeoyile kunye negesi, iikhemikhali kunye nezityalo zepetrochemical, iindawo zokucokisa, izityalo zamandla, izityalo zamandla avuselelekayo.

Eyona nto yoVavanyo

1. UNyango loBubushushu kunye neSicombululo sokuFaka iAnealing / ukuFaka iAnealing eBright

2. Ukusika ubude obufunekayo kunye nokuchithwa

3. Uvavanyo lokuHlalutywa kweMichiza kunye ne-100% ye-PMI kunye netyhubhu enye ukusuka kubushushu ngamnye ngeSpectrometer yokuFunda ngokuthe ngqo.

4. Uvavanyo olubonakalayo kunye noVavanyo lwe-Endoscope kuVavanyo loMgangatho woMgangatho

5. Uvavanyo lwe-100% lwe-Hydrostatic / uvavanyo lwe-Pneumatic kunye ne-100% yovavanyo lwangoku lwe-Eddy

6. Uvavanyo lwe-Ultrasonic luxhomekeke kwi-MPS (Inkcazo yokuThenga izinto eziphathekayo)

7. Uvavanyo lweMechanical lubandakanya uvavanyo lweTension, uvavanyo lwe-Flattening, uvavanyo lwe-Flaring, uvavanyo lobunzima

8. Uvavanyo lweMpembelelo luxhomekeke kwisicelo esiseMgangathweni

9. Uvavanyo lweSizinzi seGrain kunye noVavanyo lwe-Intergranular Corrosion

10. Umlinganiselo weUltrasoic wokutyeba kweDonga

11. Uxinzelelo lokunciphisa i-Annealing kwi-U bend Parts emva kokugoba

Umboniso weMveliso

2240900248

U-Bend iPakeji yeeMibhobho zeNtsimbi eNgatyiwayo

I'U' Bend Steel Tubes yenziwa kwiplanti yethu ngokweemfuno zabathengi.Ukugoba kunokuba Ubushushu Ukuphathwa ngokuhambelana neemfuno zabathengi kulandelwa uvavanyo lwe-hydrostatic kunye novavanyo lokungena kwedayi ukuba kuyimfuneko.

Iityhubhu ezigobileyo zisetyenziswa ngokubanzi kwiinkqubo zokutshintsha ubushushu.Izixhobo zokutshintshisa ubushushu ngokwesiseko se-U-tube engenastainless ibalulekile kwiinkalo ezibalulekileyo ngokweqhinga nezibalulekileyo zokwakhiwa koomatshini benyukliya kunye nepetrochemical.

Izitshintshi zobushushu be-U-tube Yenzelwe ukusetyenziswa kobushushu obuphezulu, ngakumbi ukuxinana komphunga okanye iinkqubo ze-oyile eshushu.Imodeli ye-Thïs ikhethwa xa ukwandiswa kokwahluka kwenza ukuba i-tube sheet exchanger esisigxina ingafaneleki kwaye xa iimeko zivimbela ukhetho lwentloko edadayo (HPF).

Ubume bomphezulu Iityhubhu ezigqityiweyo ziya kukhululeka kwisikali, ngaphandle kwemikrwelo emva kokugoba.

Uvavanyo oluSisiseko kunye noKusetyenzwa

1. Uvavanyo oluphezulu lwe-hydrostatic: ubuncinci: 10 Mpa-25Mpa.

2. Uvavanyo lomoya ongaphantsi kwamanzi emva kokugoba

3. Uvavanyo lokutyeba kodonga lwe-U-tube

4. Uvavanyo lwangoku lwe-Eddy phambi kokuba i-U-shaped bend yenziwe

5. Uvavanyo lwe-Ultrasonic phambi kokuba i-U-shaped bend yenziwe

6. Unyango olushushu lunokunciphisa uxinzelelo

Ezinye iinkcukacha ze-U Bend Tube

A. Sika yonke imibhobho kubude obuchaziweyo bomlenze, kwaye usebenzise umoya wokucoca kwangaphakathi kunye nokuchithwa.

B. Ngaphambi kokupakishwa, zombini iziphelo zengqiniba ezimilise u-U zigqunywe ngezigqubuthelo zeplastiki.

C. Isahluli esithe nkqo kwiradiyasi nganye.

D. Ibhokisi nganye yeplywood ixhotyiswe ngoluhlu lokupakisha olugqunywe ngeplastiki ukuququzelela ukuchongwa kweenkcukacha zomyalelo, kubandakanywa noluhlu oluchanekileyo lwerediyasi yangaphakathi kunye nobude.

U Bend Steel Steel Ubushushu Exchanger Tube, U Bent Pipe

Ugobe umbhobho webhoyila kunye neheater enkulu

Ngebhokisi eyomeleleyo yesakhiwo somthi ukupakisha ngezikhongozeli ezilayishwayo kunye nokuthunyelwa.

Iityhubhu zokufudumeza ii-U TUBES ezine-Stainless, i-Alloy steel grade ekhoyo, ibakala leCarbon Steel likwakhona.

Ubungakanani boluhlu lwetyhubhu:I-OD: 1/4" (6.25mm) ukuya ku-8" (203mm), WT 0.02" (0.5mm) ukuya ku-0.5" (12mm).

Ubude:30 m(Max) okanye njengemfuno yakho.

Inkqubo:Ukutsalwa ngokubanda, Ukuqengqeleka okubandayo, Ukuchaneka kuqengqeleke kuMbhobho ongenamthungo okanye iThubhu.

Gqiba:I-Annealed & pickled, i-annealing eqaqambileyo, ikhazimlisiwe.

Iphela:Beveled okanye plain end, square cut, burr free, Plastic Cap kuzo zombini eziphelweni.

Usetyenziso:I-heater, i-Heat Exchanger, i-Condencer, i-Machining, i-Bearing Machining, iNkonzo ye-API.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso