I-Studded Finned Finned Energy-Efficient Heat Exchange Component

I-Studded Finned Finned Energy-Efficient Heat Exchange Component Featured Image
  • I-Studded Finned Finned Energy-Efficient Heat Exchange Component

Inkcazelo emfutshane:

I-studs idityaniswe kwiibhubhu zisebenzisa i-welding yokumelana nombane, ivelisa i-welds ephezulu.Iityhubhu ezigqunyiweyo zisetyenziswa ikakhulu ngokukhetha iityhubhu ezicikiziweyo kwiinkqubo zokuhambisa ubushushu kwizityalo zepetrochemical, apho umphezulu ubekwe kwindawo eyingozi kakhulu efana neegesi ezimdaka okanye ulwelo.Le mibhobho kufuneka ixhathise kwizinto ezinobundlobongela kwaye kufuneka icocwe rhoqo.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

● Iityhubhu eziQiweyo ngaphandle koDayamitha: 1" ukuya ku-8"

● Fin Ukutyeba: 0.9 ukuya 3mm

● Iibhubhu ezifakwe ngaphandle kweDayamitha: 60 ukuya kwi-220mm

Imibhobho egcweleyo

Iityhubhu zentsimbi zisetyenziswa endaweni yeetyhubhu ezicikiziweyo zokuhanjiswa kobushushu kushishino lwepetrochemical, ngokubanzi kwiziko kunye neebhoyila apho umphezulu ubekwe kwindawo enomhlwa kakhulu kwaye apho imijelo yerhasi emdaka kakhulu ifuna ukucocwa rhoqo okanye ngokundlongondlongo.

Iityhubhu ezifakwe luhlobo lwetyhubhu zentsimbi.Le mibhobho inezikhonkwane ezidityaniselwe kwityhubhu yentsimbi.

Ezi studs zicwangciswe ngendlela ethile yokwakheka kulo lonke ubude bombhobho.

Zihlala zisetyenziselwa iibhoyili kunye nezixhobo zokucoca.Njengoko zinyusa indawo yomgangatho ophezulu wokudluliselwa kobushushu zisetyenziselwa ukufudumeza kwakhona.

Iityhubhu ezifakiweyo zisetyenziswa kwigumbi lokuhambisa iziko lokufudumeza kwishishini lepetrochemical ukunyusa i-coefficient yokuhambisa ubushushu kwicala elivuthayo.Iityhubhu ezigqunyiweyo ziphindwe kabini okanye kathathu isikwere seeMibhobho ezikhanyayo.Ngenxa yokusetyenziswa kweMibhobho ene-studded, amandla ashushu anokufumaneka ngokufana nokusasazeka kwemitha kuyilo olufanelekileyo.Iityhubhu ezifakwe kwimibhobho eyenziwe yinkampani yethu zamkela indlela yokumelana ne-welding.Inkqubo ye-Welding ilawulwa yiprogram ye-PLC.Ukutya iimoto kunye nokuphumelela ukusebenzisa i-servo motor.Inani eliqingqiweyo linokusetwa ngojongano lwekhompyutha yomntu.Iparamitha yokugqwesa kunye ne-coefficient yokuhlawula inokusekwa ngokweemfuno zobugcisa ukuqinisekisa umgangatho kunye nokuchaneka kweemveliso.

Umboniso weMveliso

High_Frequency_Welding_Finned_Tube11

Iityhubhu ezigqityiweyo ezixande

★ Ityhubhu OD:25~273 (mm) 1”~10”(NPS)

★ Umbhobho Wall Thk.:3.5~28.6 (mm) 0.14"~1.1"

★Ubude betyhubhu:≤25,000 (mm) ≤82 ft

★ Stud Dia.:6~25.4 (mm) 0.23”~1”

★ Ubude beSifundo:10~35 (mm) 0.4”~1.38”

★ I-Stud Pitch:8~30 (mm) 0.3”~1.2”

★ Imilo yeStud:Cylindrical, Elliptical, uhlobo lweLens

★ I-Stud ukuya kwi-engile yomphezulu wetyhubhu: eme nkqo okanye i-angular

★ Stud Material:CS (elona bakala lixhaphakileyo yi-Q235B)

★ SS (elona bakala lixhaphakileyo yi-AISI 304, 316, 409, 410, 321,347 )

★ Izinto zeTube:CS (elona bakala lixhaphakileyo yi-A106 Gr.B)

★ SS (elona bakala lixhaphakileyo yi TP304, 316, 321, 347 )

★ AS(elona bakala liqhelekileyo T/P5,9,11,22,91 )

Isicelo kunye noMgaqo woMsebenzi

1. Isixhobo sisetyenziselwa kuphela i-welding of studded tubes.Iityhubhu ezigqunyiweyo eziveliswa kusetyenziswa esi sixhobo licandelo lokutshintshiselana ngobushushu elisebenza ngamandla.Ibonakaliswe ngokugqithiswa kobushushu obuphezulu kunye noxinzelelo oluphezulu, kunye nokulungelelaniswa kakuhle kwiindawo eziphezulu zokushisa.Isetyenziswa kakhulu ekubuyiseni ubushushu benkunkuma, i-petrochemical, iinkqubo zokutshintshiselana ngobushushu kwiibhoyila zesikhululo samandla kunye namanye amashishini.

Ukusetyenziswa kweetyhubhu ezigxininisiweyo kwindawo yokufudumeza yokuhambisa ubushushu kwishishini lepetrochemical kunokwandisa icala lomsi lokudlulisa ubushushu.Ummandla weetyhubhu ezixutywe ngama-2 ukuya ku-3 amaxesha eetyhubhu ezikhanyayo.Phantsi kwemeko yoyilo olufanelekileyo, ukusebenzisa iityhubhu ezigqunyiweyo kunokufumana ubushushu obufanayo njengemitha.

2. ityhubhu edibeneyo yindawo yokutshintshana kobushushu edibeneyo esetyenzisiweyo kusetyenziswa amandla ohlobo loqhagamshelwano lohlobo lokumelana ne-welding kunye nokuphazamisa amandla okudibanisa ukudibanisa.

3. Izixhobo zamkela i-welding ye-tumor-free ye-welding ye-totshi yentsimbi emibini.I-Stepper motor isetyenziselwa ukwahlula intloko ye-stud;kunye nesikhokelo somgca sisebenzisa intloko yesilayidi somatshini.Ukuchaneka kwe-Welding kuqinisekiswa.

4. I-tubes studded welder yi-welder edibeneyo yombane.Icandelo lolawulo lombane lithatha ulawulo lweprogram ye-PLC kunye ne-man-machine interface parameter setting, kwaye umsebenzi ulula kwaye unokwethenjelwa.Iiparamitha ze-welding zisebenzisa iisetingi zekhompyuter enye.Ukusebenza kwayo kuzinzile kwaye kulula.

IiParameters eziphambili zobuGcisa

1. Umthamo wegalelo elilinganisiweyo: 90KVA

2. Igalelo lamandla ombane: 380V±10%

3. Ububanzi beetyhubhu zetsimbi ezidibeneyo: 60-220mm

4. Idayamitha yezikhonkwane ezidityanisiweyo 6-14mm (kunye nezinye izikhonkwane ezinemilo engaqhelekanga)

5. Ubude obusebenzayo beetyhubhu zetsimbi ezidibeneyo: 13m

I-6.Isithuba se-Axial se-welded studs: sinokulungiswa ngokukhululekileyo

7. Ukulungelelaniswa kwe-radially welded studs: inani elilinganayo

8. Ngelixa u-welding izinto zensimbi ezingenasici, i-preheater iyafuneka (eyenziwe ngumsebenzisi ngokwakhe).

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso